The MOS-type oil skimmer is developed for applications with many solid particles. It separates the tramp oil effectively and extends the lifetime of your cutting fluid.

The technique exploits the viscosity differential between oil and cutting fluid. The tramp oil has greater viscosity than the cutting fluid and will therefore cling to the rotating spiral. The oil is transported upwards and is continuously scraped off into a tank by a rotating metal plate that is attached to the top of the spiral.

This new way of separating tramp oil is highly effective, gives you minimal loss of cutting fluids and has low maintenance requirements, low operating costs and a compact design.

The MOS-type oil skimmer has a capacity of 0.026 gal/h (100 ml/h) depending on the amount of oil and its viscosity.

Separation of tramp oil from the coolant

Directly on the tank

100ml/h

150 mm, 200 mm, 300 mm

Separation of tramp oil from the coolant

Directly on the tank

0.026gal./h

6”, 8”, 12”

Separation of tramp oil from the coolant

Directly on the tank

100ml/h

150 mm, 200 mm, 300 mm

Separation of tramp oil from the coolant

Directly on the tank

0.026gal./h

6”, 8”, 12”

The MOS-type oil skimmer is developed for applications with many solid particles. It separates the tramp oil effectively and extends the lifetime of your cutting fluid.

The technique exploits the viscosity differential between oil and cutting fluid. The tramp oil has greater viscosity than the cutting fluid and will therefore cling to the rotating spiral. The oil is transported upwards and is continuously scraped off into a tank by a rotating metal plate that is attached to the top of the spiral.

This new way of separating tramp oil is highly effective, gives you minimal loss of cutting fluids and has low maintenance requirements, low operating costs and a compact design.

The MOS-type oil skimmer has a capacity of 0.026 gal/h (100 ml/h) depending on the amount of oil and its viscosity.

Separation of tramp oil from the coolant

Directly on the tank

100ml/h

150 mm, 200 mm, 300 mm

Separation of tramp oil from the coolant

Directly on the tank

0.026gal./h

6”, 8”, 12”

    No products found
Charles Goforth, President Bargo Engineering inc., USA

Bargo Engineering Inc., USA

”Upon first hearing about the technology, we thought this was just another mist collector. We have tried others in the past that worked for a short time and clogged up with cutting fluid and did very little to improve the air quality. The 3nine Mist Separator however, have a very high purification rate and minimum filter replacement (2 years with one filter). The machine operator as well as other staff members have noticed a significant improvement in the air quality. Thank you for introducing us to the 3nine product line.”